background image

©2018 PACE Inc., Vass, North Carolina.  All Rights Reserved 

www.paceworldwide.com

                   Page 10

 

Warranty 

 
PACE warrants that this equipment will be free of defects in materials and workmanship for a period of one (1) 
year from the date of receipt by the first user. 
This warranty does not cover repair of replacement required as a result of misuse, mishandling or improper 
storage.  Failure to perform recommended routine maintenance, alterations or repairs made other than in 
accordance with PACE’s directions, or removal or alteration of identification plates in any way will void this 
warranty.  This warranty is available only to the first user, but the exclusions and limitations therein apply to all 
persons and entities. 
 
This warranty does not apply to consumable items such as filters. 
 
PACE MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED, AND MAKES NO WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
 
PACE will, at its option, repair or replace and defective equipment or parts at its facility or other location 
approved by it at no charge to the user, or provide parts without charge for installation by the user in the field at 
the user’s expense and risk.  User will be responsible for all costs of shipping equipment to PACE or other 
warranty location for warranty service. 
 
EXCEPT FOR THE REMEDY ABOVE DESCRIBED, UNLESS OTHERWISE REQUIRED BY APPLICABLE 
LAW, PACE WILL HAVE NO OTHER OBLIGATION WITH REGARD TO ANY BREACH OF WARRANTY OR 
OTHER CLAIM WITH RESPECT TO THE EQUIPMENT, OR LIABILITY FOR ANY DIRECT, INDIRECT, 
CONSEQUENTIAL, OR INCIDENTAL LOSS OR DAMAGE CAUSED BY OR OCCURRING IN CONNECTION 
WITH ANY OF THE EQUIPMENT. 
 
To obtain warranty service, contact the appropriate PACE company. 
 
Do NOT return defective equipment or parts to PACE without obtaining prior authorization. 
 
Any warranty or other claim with respect to the equipment must be made in writing and delivered to PACE (or 
local authorized PACE Distributor outside the U.S.) within a reasonable time of the expiration date of this 
warranty.  Sufficient evidence of purchase and date of receipt must also be included, otherwise user’s rights 
under this warranty shall be deemed waived. 
 
 

 

 
 
 
Questions or comments? 
 
Contact us on the World Wide Web at 

www.paceworldwide.com

 or reach out by email at 

[email protected] 
 

PACE Worldwide 

Pace Europe 

346 Grant Road 

11 Holdom Avenue 

Vass, NC 28394 

Bletchley, Milton Keynes 
United Kingdom, MK1 1QU  

Tel: (877) 882-PACE 

 

Tel: (910) 695-7223 

Tel: 011 44 1908 277666 

Fax: (910) 695-1594 

Fax: 011 44 1908 277777

 

 

 

 

 

 

 

Summary of Contents for ARM-EVAC 150














Reviews: