background image

1

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ................. 2

REAR PANEL ............................................................... 8

CONNECTING TO THE AC POWER SUPPLY ...... 10

TURNING ON AND TUNING IN ............................ 12

OPERATING YOUR  HOME TERMINAL ................. 14

FRONT PANEL .......................................................... 16

SOLVING PROBLEMS .............................................. 17

Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of 
Dolby Laboratories. Confidential Unpublished Works.
©1992-1997 Dolby Laboratories, Inc. All rights reserved.

DOLBY 

Pace

®

 and 

®

 are trademarks of Pace Micro Technology plc.

PowerKEY and the PowerKEY design are registered trademarks of
Scientific-Atlanta, Inc.

Other trademarks listed herein are the property of their respective owners

This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is
intended for home and other limited pay-per-view uses only unless
otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.

Copyright © 2001
Pace Micro Technology plc
All rights reserved

The model and serial number of the Pace 510 home
terminal are on a label on its base.

When you switch off your home terminal, it still uses some power (unless
you unplug it at the wall socket-outlet). However, the Pace 510 home
terminal  complies with ENERGY STAR guidelines for energy efficiency and
therefore displays the ENERGY STAR label shown above. This means that,
when this home terminal is off, it consumes much less power than similar,
non-labeled products. ENERGY STAR is a dynamic industry/government
partnership that makes it easy for businesses and consumers to save money
and protect the environment.

This manual, with related information, is available on
the Pace website at: www.pacemicro.com/manuals.asp

Summary of Contents for 510 Home Terminal






















Reviews: