Pace Technologies MEGA-T250S, Instruction Manual

Page: 20 / 30

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
MEGA - T250S
Abrasive Cutter
1. Remove blade locking bolt (reverse threaded).
2. Position new 250 mm abrasive cut - off wheel into position.
Use only certified abrasive cut - off wheels.
3. Gently tighten blade locking bolt (Note: locking bolt is reverse
threaded).
4.4 Changing abrasive cut - off wheels
15
!
Changing Blade
Remove: Loosen by
turning clockwise
Tighten: Turn counter -
clockwise
To prevent
shaft from
turning, push
in locking rod
to hold in place