9
First, ensure that the Foam Washer is in place on the Drain Fitting as this
washer will help prevent water leakage. Next, test fit the drain tube to
determine the length you want to trim it. Always caution on the long side. Trim
the end that will be inserted through the truck bed using the wire cutters or a
utility knife.
With the cover
opened
, insert the drain tube fittings into the pre-drilled holes
on the underside of the canister by pushing them in place from under the
canister. Drain Fitting should click into place.
Place the other end of the drain tube through the plastic/rubber access port or
through the pre-drilled holes in the floor or the front wall of the truck bed. If
routing through the front wall, ensure that the drain tubes are inserted and
directed down so water flows out of the truck.
(WARNING: Use caution not to
drill into wires, hoses or the cab!)
To remove the drain tubes reach under the canister, grab the drain tube fitting
and turn it while applying light downward pressure. When the retaining tabs
align with notches in the bottom of the canister the Drain Tube and Fitting will
drop out.
STEP 11: INSTALLING CANISTER DRAIN TUBES
Notch
Feature
Foam
Washer
Drain Fitting
Drain
Tube
FIG. 11A
