Paccar Winch BRADEN BA5A, Installation Maintenance And Service Manual

Page: 35 / 36

33
8. Rotate the crank to the next top dead centre position
and repeat the procedure for each piston. Turn crank
360 degrees to check correct functioning.
9. Fit the gasket (28) to the output flange (24 A / B). Turn
the motor 180 degrees to allow valve to be fitted.
10. Lubricate valve (2) and Inside Bore of Housing (3).
11. Rebuild the valve assembly in the reverse order.
Check it rotates freely. Fit valve assembly on to the
motor ensuring the different size drive dowels (61)
and (62) are located in the crankshaft.
The remaining build procedure is the reverse to initially
dismantling.
SPX FLUID POWER
RM Air Motor
Installation / Maintenance / Servicing