VOL
SWI-X
SWI-X
SWI-X
SWI-X
Programming the SWI-X to Control the Head Unit
IMPORTANT!
Some steps of the programming instructions
must be completed within a certain number of seconds following the
previous step.
Review the complete instruction before beginning the programming sequence.
Step 11.
Turn the vehicle ignition to the ON
position.
LEDs will flash to
indicate set version
number. Left LED: 10’s
place
Right LED: 1’s place
If the desired version number is 4, proceed with the following steps.
If not, skip to Step 18.
Step 12.
Press and hold
programming/
mode button
on SWI-X.
Step 14.
Press and hold the TEMP UP but-
ton on the steering wheel control.
Left LED will turn off.
Left LED will
light.
Step 13.
Release
programming/
mode button.
Step 15.
Release the TEMP UP button.
Left LED will turn on.
The function is pro-
grammed.
Step 16.
Repeat Steps 14 and 15, using the TEMP DOWN Button.
Step 17a.
If the vehicle is equipped with FAN UP and FAN DOWN buttons:
Repeat Steps 14 and 15 for these buttons as well.
Step 17b.
If the vehicle is NOT equipped with FAN UP and FAN DOWN buttons:
Press and release the programming/
mode button on the SWI-X.
OFF
ACC
IGN
STRT
SWI-X
SWI-X
TEMP
SWI-X
TEMP
SWI-X
In either case, left
LED will flash once
and stay on.
Skip to Step 20.
You have 7 sec-
onds to perform
the next step.
Step 18.
Press
and hold
programming/
mode button
on SWI-X.
Left LED will
light.
Step 19.
Release
programming/
mode button.
SWI-X
SWI-X
SWI-X
Step 20.
Within 7 seconds
, press and
hold the VOLUME UP button on
the steering wheel control.
Left LED will turn off.
SWI-X