Radio Replacement & Steering Wheel Control Interface
for Dodge/Jeep/Ram Vehicles
RP4-CH21
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 4
Rev: 2
Date: 041218
Optional Steering Wheel Control Programming (cont)
Alpine
JVC
Kenwood
Clarion
Other *
Pioneer
Sony
Fusion
1
2
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
Volume -
3
Mute
Mute
Mute
Mute
Mute
Mute
Mute
Mute
4
Source
Source
Source
Source
5
Preset -
Track +
Play
Preset -
Preset -
Preset -
Track +
6
Source
Track -
Track +
Search -
Source
Source
Source / End Call
Track -
7
Track +
Band / Disc +
Track -
Band
Track +
Track +
Track +
Audio
8
Track -
Preset / Disc -
Disc / FM +
Send / End
Track -
Track -
Track -
Power
9
Power
Select
Disc / AM -
Send
Band
Band
Band
10
Enter / Play
Attenuation
Answer
End
Answer **
Phone Menu
Power / End Call
11
Band / Program
Phone Receive
Voice Dial
VR
End **
Answer Call
Voice Dial / Answer / End Call
12
Receive
Phone Reject
On Hook
PTT **
End Call
VR (Android Auto & Car Play)
Answer / End Call***
13
End
Voice Dial
Off Hook
VR
14
VR
Power
Mute
15
* Advent, Boyo, Dual, Lightning Audio, Jensen, Rockford Fosgate & Visteon ** Jensen & Advent ONLY ***
XAV-AX100 Only
Optional Programming Order
Programming
1. Turn the key to the ignition position.
2. Press and release programming button on the side of the interface.
3. Within 7 seconds, press the button that is to be learned on the steering wheel. The LED will turn off when the button is pressed.
At this point you have two options:
A. For short press functionality:
Release the button within 1.5 seconds. The LED will turn back on.
B. For long press functionality:
Hold the button until the LED starts blinking. Release the button and the LED will
go back to solid.
4. If you need to program more buttons, repeat step 3 for each additional audio function on the steering wheel.
5.
If you come across a function in the chart that your steering wheel does not have, or you do not want to program, press and
release the program button on the side of the interface to skip that function.
6.
Once programming is completed, wait seven seconds. The LED will flash three times indicating end of programming.
7. Test the interface for proper functionality. Whenever a SWC is pressed the LED on the interface should blink. If any function
does not work, repeat the programming steps
RP4-CH21 SWC Notes
1. In vehicles that do not have SWC for the radio but do have
SWC for the menu you can program the up/down/left/right
arrows to whatever you want. We recommend that you
have the DIC in the speedometer screen when using the
SWC for the radio (Fig.1)
2. The Mute, Answer and End buttons in the Ram Promaster
can not be programmed for long press functionality.
Fig. 1
1
2 3 4 5
6 7
8 9
0
Alpine
JVC
Kenwood /
Lightning Audio
Clarion /
Nakamichi
Pioneer /
Other*
Sony
Fusion
1
2
3
4
7
8
9
*Other - Dual / Axxera (these brands could also have 2 - wire resistive), Jensen, Rockford Fosgate
SET RADIO SELECT SWITCH
