Radio Replacement & Steering Wheel Control Interface
for Dodge/Jeep/Ram Vehicles
RP4-CH21
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Page 2
Rev: 2
Date: 041218
Installation Steps
1. The radio select rotary switch on the side of the interface must be adjusted to the proper radio
setting before plugging the interface into the vehicle.
2. Make all connections as described in the connection chart on page 1.
Vehicles without a factory amplifier:
Connect the
aftermarket radio’s front and rear speaker wires to the vehicle connector.
Vehicles with a factory amplifier:
Connect the
front outputs of the aftermarket radio to the rear inputs of the vehicle connector. This will allow navigation voice prompts and
Bluetooth calls to be heard.
Illustration / Schematic
Aftermarket Radio
Connections
Vehicle
Connector
SWC Connection
x4
See above chart for
different radio type
connections
Acc On/
Programming
LED
Programming
Button
Wiring
SWC Connection
Wiring Connection Chart
Red / White
Parking Brake
Output (-)
Purple / White
Vehicle Speed
Output
Blue / White
Amp Turn On Input
Red
Accessory Output
Output (10 amp)
Orange / White
Illumination Output
(+)
Green
Reverse Output (+)
Interface Connector
Yellow
B12v
Black
Ground
White
Front L + input
White / Black
Front L - input
Grey
Front R + input
Grey / Black
Front R - input
Green
Rear L + input
Green / Black
Rear L - input
Purple
Rear R + input
Purple / Black
Rear R - input
Yellow RCA
Factory Reverse
Camera Video (if
equipped)
Vehicle Connector
SWC Connector
Blu/Yel
Kenwwod, Newer
JVC
3.5mm Jack
Alpine, JVC,
Clarion, Fusion,
Pioneer, Sony,
Boyo, Dual,
Lightning Audio,
Visteon or Advent
1
2 3 4 5
6 7
8 9
0
Alpine
JVC
Kenwood /
Lightning Audio
Clarion /
Nakamichi
Pioneer /
Other*
Sony
Fusion
1
2
3
4
7
8
9
*Other - Dual / Axxera (these brands could also have 2 - wire resistive), Jensen, Rockford Fosgate
SET RADIO SELECT SWITCH
