Reverse Camera Input and Navigation Unlock
Interface for Chrysler / Dodge / Jeep Vehicles
BCI-CH21
Pacific Accessory Corporation
Common Use Examples w/Setup
Adding Reverse Camera Only
•
DIP switch 1
= ON
•
DIP switch 2
= OFF
•
DIP switch 3
= OFF
• No additional programming needed as Programmable Output 1
(10A) is set to “Accessory” by default (use to power cameras)
• Need to use BCI-CH21-AUX Harness (included)
Adding Reverse Camera and Navigation Unlock
•
DIP switch 1
= ON
•
DIP switch 2
= ON
•
DIP switch 3
= OFF
• No additional programming needed as Programmable Output 1
(10A) is set to “Accessory” by default (use to power camera)
• Need to use BCI-CH21-AUX Harness (included)
Adding Reverse Camera and VES
•
DIP switch 1
= ON
•
DIP switch 2
= User Preference
•
DIP switch 3
= ON
• No additional programming needed as Programmable Output 1
(10A) is set to accessory by default (use to power cameras and
video source)
• Need to use BCI-CH21-AUX Harness (included)
Adding Reverse Camera and a Bed Camera using the AVS21
(sold separately)
•
DIP switch 1
= ON
•
DIP switch 2
= OFF
•
DIP switch 3
= OFF
•
PC Settings
• Blind Spot Camera
= OFF.
•
Front Camera
= OFF
•
Programmable Output 1 (10A)
= Any Camera Active or
Accessory (use to power cameras)
•
Programmable Output 2 (1A)
= Forced Reverse Camera
(use to trigger AVS21 when the forced reverse camera
feature is triggered via the SWC or the on-demand switch)
•
Programmable Output 3 (1A)
= OFF
• Need to use BCI-CH21-AUX Harness (included
Adding Blind Spot Cameras using the VS41 (sold separately)
•
DIP switch 1
= ON if adding rev cam; OFF if already equipped
•
DIP switch 2
= User Preference
•
DIP switch 3
= OFF
•
PC Settings
• Blind Spot Camera
= User Preference, can’t be OFF
•
Front Camera
= Off
•
Programmable Output 1 (10A)
= Any Camera Active or
Accessory (use to power cameras)
•
Programmable Output 2
= OFF
•
Programmable Output 3
= OFF
• Need to use BCI-CH21 AUX Harness
Adding Blind Spot Cameras and a Front Camera using the VS41
(sold separately)
•
DIP switch 1
= ON if adding reverse camera; OFF if already
equipped
•
DIP switch 2
= User Preference
•
DIP switch 3
= OFF
•
PC Settings
• Blind Spot Camera
= User Preference, can’t be OFF.
•
Front Camera
= User Preference, can’t be OFF.
•
Programmable Output 1 (10A)
= Any Camera Active or
Accessory (use to power cameras)
•
Programmable Output 2 (1A)
= OFF
•
Programmable Output 3 (1A)
= OFF
• Need to use BCI-CH21-AUX Harness
Adding Reverse Camera, Blind Spot Cameras, and a Front
Camera using the VS41 (sold separately), a bed camera using
the AVS21 (sold separately), Navigation Unlock, and VES
•
DIP switch 1
= ON
•
DIP switch 2
= ON
•
DIP switch 3
= ON
•
PC Settings
• Blind Spot Camera =
User Preference, can’t be OFF.
• Front Camera = User Preference, can’t be OFF.
• Programmable Output 1 (10A) = Accessory (use to power
cameras and video source)
• Programmable Output 2 (1A) = Forced Reverse Camera
(use to trigger AVS21 when the forced reverse camera
feature is triggered via the SWC or the on-demand switch)
• Programmable Output 3 (1A) = OFF
• Need to use BCI-CH21-AUX Harness (included)
Reverse Camera
Navigation Unlock
VES Activation
Not Used
1
2
3
4
Set DIP switches to the ON position to activate the corresponding features.
Set DIP switches to the OFF position for any features that are not desired.
