www.pab.hr
In case of evident damage (impacts, broken parts, significant scratches, torn straps
or paddings, coating removal on the shell or visors, missing components, etc.)
identified during the regular checks, the helmet shall be sent to a PAB approved
maintenance centre for complete control processing.
Only original PAB parts are authorised for replacement and ensure the performance
of the helmet. Replace any damaged parts only with original PAB parts.
Periodic checks
PAB Akrapovic recommends to execute a complete and detailed inspection of the
helmet every two (2) years or more often (e.g. every year) in case of intensive use
of the helmet. Execute a detailed check of the helmet every time the helmet has
been exposed to severe conditions (direct flame contact, very high temperatures,
mechanical impact, contact with chemicals or pouring metal).
Cleaning and care
PLASTIC COMPONENTS: use soapy water and a soft cloth. Do not use detergents,
solvent based products or abrasive materials.
INTERNAL GOGGLES: use soapy water and a soft cloth. Do not use detergents, solvent
based products or abrasive materials.
FACE SHIELD*: if your configuration includes the face shield, use soapy water and
a soft cloth to clean it. Do not use detergents, solvent based products or abrasive
materials.
CHIN STRAPS: use soapy water and a soft cloth.
HEAD PADDING, HEAD BAND PADDING, NECK PIECE: you can remove these parts for an
easier cleaning (see picture).
Please do not remove the interior basket to perform this step!
d
PAB
MP1 Standard
