www.pab.hr
1
Position the internal goggles: pull
down the goggles into use position.
Pull them up again into standby
position when not needed.
To facilitate this step and to avoid
fingerprints on the goggles use the
tabs on the bottom left and right part
of the goggles.
2
* If your helmet configuration
includes the face shield (visor),
position the internal goggles first.
Then pull down the face shield into
use position or pull it up (over the
helmet) into standby position.
To facilitate this step and to avoid
fingerprints on the visor use the bulge
at the bottom of the face shield.
ADJUSTING THE INTEGRATED INTERNAL GOGGLES AND FACE SHIELD *
(* The face shield is an optional accessory and is not delivered with the helmet
unless you have purchased a helmet configuration with face shield.)
Picture 19
Picture 20
PAB
MP1 Standard
