PAB FIRE 05 User Manual Download Page 5

5

 

OVERVIEW

 

SAFETY NOTICE 

   Warning: 

Read these instructions carefully before using the helmet. 

For adequate protection, this helmet must fit or be 

adjusted to the size of the user’s head.

 

Inappropriate  use,  maintenance  or  servicing  can  affect  the  function  of  the  helmet  and  can 

seriously endanger the user’s life. The helmet’s operability must be checked and verified before 

each use.  The  helmet  is not  to  be  used if  the  operability  test  is unsuccessful,  if  the  helmet  is 

damaged, if proper servicing or maintenance has not been made, or if PAB Akrapović original 

spare parts have not been used. 

The length of the useable life of this helmet will be affected by the types of materials used in its 

construction and the environments in which the helmet is used and stored. Recommendations 
on this topic should be sought from the manufacturer. 

The  intended  protection  provided  by  the  helmet  can  only  be  ensured  when  it  is  properly 

assembled and correctly fitted. Any removable part must not be worn separately. 

When fitted with another item of personal protective equipment or with an accessory (other than 

as supplied by the helmet manufacturer for use with this helmet) a helmet marked as complying 
with EN 443 might no longer satisfy all clauses of the standard. Refer to information provided by 
the helmet manufacturer. 

The helmet provides protection of the head and face against shock, sharp objects, splatters of 

corrosive chemicals (Sulphuric acid, Sodium hydroxide, p-Xylene, Butan-1-ol, n-Heptane), molten 

metals,  radiating  heat,  flames,  electric  current.  The  user’s  protection  is  not  guaranteed  in 

situations where the conditions exceed those described in the specifications above. 

This helmet complies with the retention requirements of standard EN 443:2008, only when the 

chin  strap  supplied  by  PAB  Akrapović

  is  worn  and  adjusted  in  accordance  with  these 

instructions. 

The helmet absorbs the energy of a blow by partial destruction of, or damage to, the helmet. 

Even though such damage may not be readily apparent, any helmet subjected to severe impact 
should be replaced.  

Replace any damaged parts only with original PAB Akrapović parts, as only these original parts 

are authorised and ensure the performance of the helmet. 

Summary of Contents for FIRE 05


















Reviews: