PAB FIRE 05, User Manual, Page: 15 / 17

PAB FIRE 05
www.pab.hr
Replace any damaged parts only with original PAB parts. Only original PAB parts are permitted for
replacement, and only these ensure the performance of the helmet.
If the eye protector needs to be replaced, use a screwdriver to unscrew the two screws that secure the
protector (the screws are positioned behind the headband). Remove the damaged eye protector and
put the new eye protector in position. Secure it by tightening the two screws behind the headband.
If significant damage (broken parts, deep scratches, torn straps or paddings, missing components, etc.)
is identified during a regular check, the helmet should be replaced. The helmet should not be used if it
is clearly damaged, if proper servicing or maintenance has not been performed, or if PAB original spare
parts have not been used. Inappropriate use, maintenance, or servicing can affect the function of the
helmet and can seriously endanger the user’s life. The helmet’s operability must be checked and
verified before each use.
Warning:
Do not drop the helmet. Prevent impacts to the helmet that could damage (scratch or crack) the visor
or the goggles.
Check the helmet regularly for cracks on the parts in contact with the skin. Such damage could cause
discomfort.
STORAGE AND TRANSPORT
Store the helmet in a closed cabinet to prevent extended exposure to cold, heat, humidity, light,
fumes…To extend the lifetime of the helmet to the maximum clean it after each use and before storing.
Before transport put the visor and the goggles in standby position and place the helmet in its PAB
protective textile bag.
SERVICE LIFE AND DISCARD
PAB helmets and their components (including visors and goggles) are very resistant to ageing, with an
expected service life of 10 years, but only if provided that they are used, stored, maintained and
serviced properly. Exposure to extreme temperatures, strong impacts, corrosive chemicals, flames or
aggressive environments have a significant impact on the shelf life of the product.
Inspect and clean carefully the helmet after each use and replace any damaged parts or products. To
ensure a lifetime as long as possible please follow the instructions, information and recommendations
stated in this user manual.