PAAMON PAMCID430GT Manual Download Page 5

Page: 5 / 12

4) If there’s no operation over 30seconds, the panel would exit setting

status automatically.

1.Enter Settings

Press , then input the 4-digit program password and to enter
setting status. (default password: 1234)

2.Time Setting

After  enter  settings,  you  could  see  “clock  setting”.  Enter  it  to  set  the
time  and  date.  The  first  group  is  for  time  (hour:  minute:  second),  the
second  is  for  date  (month/day/year)  and  the  last  is  for  day.  Please
press              to  clear  the  previous  data  and  then  input  the  correct  data.
And finally press to confirm.

Operation figures:

3.Alarm Call & SMS Number Setting

This system can store 5 groups of alarm numbers. When alarming, it
will make alarm call or send sms to these numbers. And the call will be
made in order for three times automatically, until someone gets through
it.
Method:

enter “phone No. setting” menu, choose “Phone Alarm” or

press                  to  choose  “SMS Alarm”.  Press              and  then  delete  the
preset  numbers.  Input  the  number  you  want  to  set.  Save  it,  then  you
will  see  the  “phone  group”  change  to  “2”  automatically.  That  means
after setting a group of number successfully, it will enter the setting of
next number automatically.
Note:

Each group of number could not exceed 15-digit.

Each group of number can save only as phone call number or sms
number.
The panel will handle the numbers in serial order. For example, you set
the first number as sms number, and the second as phone number, it
will send sms before making alarm call.

4.SMS Attention Number Setting

SMS attention number means the number that will receive sms when
the external power is cut off or recovered, the system is armed or
disarmed, the telephone line has error, etc. The sms content will also
be displayed on the screen. This system can store 1 SMS attention
number.

This number will not receive defense zone alarm sms.

Method:  enter  “SMS  Setting”  menu,  delete  the  preset  numbers  and
then input the number you want to set. Save it, then you will see “AC
Power Recover”, “Arm/ Disarm SMS”, “PSTN Off”, “Battery Low-volt”,
and  “Sensor  Low-volt”.  Press                to  choose  on  or  off.  (System
default: off)
AC Power Recover: when the external power supply is off more than 8
seconds, the panel will send sms “AC Power Fail”; when the external
power supply is recovered for 30s, it will send sms “Alarm System: AC
Power On”.
Arm/  Disarm  SMS:  when  system  is  armed  or  disarmed,  it  will  send
sms “Alarm System: Armed/ Disarmed”.
PSTN Off: when the telephone line is cut for 5 seconds, the panel will
send sms “Alarm System: PSTN Off”.
Battery  Low-volt:  when  the  main  panel  battery  is  in  low  power,  it  will
send sms “Alarm System: Low-volt”.
Sensor  Low-volt:  when  the  sensor  (PIR  sensor,  door  contact  sensor)
battery is in low power, it will send sms “Sensor Low-volt”.

NOTE: This version alarm system does not have “

function. Please kindly contact us if required.

sensor Low-volt”

Function Settings

Clock Setting

Phone No.setting
Sms Serring
Voice Recording

Clock Setting

05/01/2013
WED

14:35:21

Phone Group 1

Phone Alarm >

SMS Alarm