INSTRUCTION MANUAL
P8315 DUMMY CAMERA WITH
BLINKING LED
-Deterrence against intruders-
Congratulations on your purchase of the
Dummy Camera with Blinking LED.
This product was designed to protect
you against burglars and intruders. Due
to the striking similarity to a real camera,
with real lens, integrated video cable,
flashing LED light and the pan-tilt
mechanism, the intruders think that all
events around your home or business
are filmed - like a highly secure bank.
The video cable is fixed at the camera
bottom, so the installation can be carried
our easily. You don’t have to spend a lot
of money for security systems. Protect
your property in a cheap and effective
way with the Dummy Camera. Leave
your home or business with a safe
feeling.
INSTALLATION
After unpacking the camera and the wall
mount, install 2 X AA batteries. Remove
the screw holding the mount to the
camera body. The inner housing will
slide out of the outer housing. Install
batteries according to diagram in battery
holder. Re-assemble unit. Choose a
suitable location for the camera at the
entrance or other sensitive area. The
unit should be shielded from direct
rainfall. Using the mount as a template,
mark and drill two small holes into the
wall. Insert the plastic anchors into the
holes. Using your screwdriver finish the
installation with the two provided
screws.
POSITION
The Dummy Camera with Binking LED
is equipped with a pan-tilt mechanism.
To adjust the slewing range, loosen the
screw holding the pan-tilt arm to the
camera body. Rotate the camera until
the angle is correct. Re-tighten the
screw. To adjust the inclination, firmly
move the body of the camera until the
angle is correct. If the camera is too
loose on the arm, tighten the screw.
MAINTENANCE
Replace batteries as necessary.
P3 INTERNATIONAL CORPORATION
LIMITED WARRANTY
P3 INTERNATIONAL CORPORATION ("P3")
warrants to the original retail purchaser only, that its
product is free from defects in material or
workmanship under the condition of normal use and
service for a period of six (6) months from the date of
purchase. In the event that a defect, malfunction or
failure occurs or is discovered during the warranty
period, P3 will repair or replace at its option the
product or component part(s) which shall appear in
the reasonable judgment of P3 to be defective or not
to factory specifications. A product requiring service
is to be returned to P3 along with the sales receipt or
other proof of purchase acceptable to P3 and a
statement describing the defect or malfunction. All
transportation costs shall be borne by the owner and
the risk of loss shall be upon the party initiating the
transportation. All items repaired or replaced
thereunder shall be subjected to the same limited
warranty for a period of six (6) months from the day
P3 ships the repaired or replaced product. The
warranty does not apply to any product that has been
subject to misuse, tampering, neglect, or accident or
as a result of unauthorized alterations or repairs to the
product. This warranty is void if the serial number (if
any) has been removed, altered, or defaced. This
warranty is in lieu of all warranties expressed or
implied, including the implied warranties of
merchantability and fitness for a particular purpose
which are expressly excluded or disclaimed. P3 shall
not be responsible for consequential, incidental or
other damages, and P3 expressly excludes and
disclaims liability for any damages resulting from the
use, operation, improper application, malfunction or
defeat of any P3 product covered by this limited
warranty. P3's obligation is strictly and exclusively
limited to the replacement or repair of any defective
product or component part(s). Some states do not
allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or
exclusion may not apply to you. P3 does not assume
or authorize anyone to assume for it any other
obligation whatsoever. Some states do not allow
limitation on how long an implied warranty lasts, so
the above limitations may not apply to you. It is the
owner/user's responsibility to comply with local, state,
or federal regulations, if any, that may pertain to P3
products or their use. This warranty gives you
specific legal rights, and you may also have other
rights which vary from state to state.
If you experience difficulty in the operation of your
unit, or if your unit requires repair please contact:
P3 INTERNATIONAL CORPORATION
TECHNICAL SUPPORT
71 West 23
rd
Street
Suite 1201
New York, NY 10010-4102
Tel: 212-741-7289
Fax: 212-741-2288
