P1PE P6220C User Manual Download Page 4

1. SAFETY

1.1.

 

General safety notes.

1.1.1.

 

The operator of the machine is responsible for, and has a duty of care 

in making sure that the machine is operated safely and in accordance 

with the instructions in this user manual. Keep the manual safe and pass 

it on if the machine is loaned or sold to another user. 

1.1.2.

 

Please note the following safety points. 

1.1.2.1.

 

The machine should never be left it in a condition which would 

allow an untrained or unauthorised person/s to operate this machine. 

1.1.2.1.1.

 

All due care and diligence should be taken by the 

operator for the safety of, and with regard to, those around 

whilst

 

using 

the machine. 

1.1.2.1.2.

 

Some or all of the following - warning signs, symbols 

and/or PPE pictograms may appear throughout this manual. 

You MUST adhere to their warning/s. Failure to do so may 

result in personal injury to yourself or those around you. 

The FOLLOWING safety notes will help avoid or reduce risk of injury or death. 

Indicates a hazard, which, if 

not avoided, could result in 

serious injury or death. 

Indicates a hazard, which, if 

not avoided, could result in 

serious injury. 

Indicates a hazard which, if 

not avoided, might result in 

minor or moderate injury. 

Indicates a situation that 

could easily result in 

equipment damage. 

READ and keep the manual 

safe and pass it on if the 

machine is loaned or sold 

to 

another user

You MUST fully read 

instructions to make sure 

you use and operate 

machine safely 

Appropriate Personal Protective Equipment (PPE) 

MUST be worn at all times when machine is in use or being repaired. 

ALWAYS keep the working area clear of non-essential people to include, but not 

limited to, children, the elderly and vulnerable persons. 

NEVER ALLOW an untrained person to use this machine. 

Page 4

Summary of Contents for P6220C

































Reviews: