P1PE P6220C, User Manual

Page: 23 / 32

wear is obvious, replace it with new one. Never fit a new chain on a worn
sprocket, or a worn chain on a new sprocket.
1 – Sprocket 2 – Needle bearing 3 – Clutch drum
4 – Spacer 5 – Clutch shoe
7.2.4. Fuel filter.
7.2.4.1. Disassemble the filter and wash with petrol, or replace with new one as
required.
7.2.5. Oil filter.
7.2.5.1. Disassemble the filter and wash with petrol, or replace with new one as
required.
7.2.6. Front and rear dampers.
7.2.6.1. Replace if there are obvious cracks on the rubber part.
7.3. Maintenance of saw chain and guide bar.
7.3.1. Saw chain.
It is very important to make sure that the saw chain cutters are kept sharp for safe and
smooth operation.
7.3.1.1. Your cutters need to be sharpened when;
7.3.1.1.1. Sawdust becomes powder-like.
7.3.1.1.2. You need to apply extra force to saw into wood.
7.3.1.1.3. The cut way does not go straight.
7.3.1.1.4. Vibration increases.
7.3.1.1.5. Fuel consumption increases.
7.3.1.2. Cutter setting standards.
Be sure wear safety gloves.
7.3.1.2.1. Before filing;
7.3.1.2.2. Make sure the saw chain in held securely
Page 23