P1PE P5200BC, User Manual, Page: 7 / 32

7
1.71 The operating noise of the machine can damage your hearing. Wear hearing
protection such as earplugs or ear defenders to protect your hearing. Long-term
and regular users are advised to have hearing checked regularly. Be especially
vigilant and cautious when hearing ear protection because your ability to hear alarm
warnings will be reduced.
1.72 Noise emissions for this equipment is unavoidable. Carry out noisy work at approved
times and for certain periods. Limit the working time to a minimum. For your personal
protection and protection of people working nearby it is also advisable for them to
wear hearing protection.
1.73 See CERTIFICATE of CONFORMITY section for Outdoor Noise declaration of
conformity.
2. MACHINE SPECIFIC SAFETY
WARNING
DO NOT modify the unit in any way.
Only use the tool for the job for which it is intended.
ALWAYS remove the HT lead from the spark plug when checking the machine or
changing parts.
2.0 Inspect the tool before each use.
2.1 Replace any damaged parts before operation.
2.2 Check for fuel leaks and make sure all fasteners are secure and in place.
2.3 Make sure the safety guard is properly attached.
2.4 Use only recommended accessories and parts approved by the manufacturer.
Non approved attachments may cause damage to the machine or harm to the user
and will also void the machines warranty.
2.5 Under no circumstances should you ever take the product apart or alter it any way
even if the item if faulty.
You may damage or cause further harm by taking the products apart and you will
void the warranty in doing so.
2.6 This unit is designed to cut fresh brush with a thickness smaller than 10mm.
DO NOT attempt to cut brush with a thickness greater than 10mm.
2.7 Blunt blades increase the risk of kickback, so check the blade carefully
before each use.
ALWAYS replace a blunt blade.
2.8 This brush cutter is designed exclusively for cutting garden areas in private domestic
settings. Using it for any purpose other than those intended qualify as improper
use.
The operator is solely responsible for assuming all risks.
2.9 DO NOT overload the machine.