11
PRESSURE WASHER PREPARATION
ADD PETROL
WARNING: This pressure washer may emit highly flammable and explosive petrol
vapors, which can cause severe burns or even death if ignited. A nearby open flame can
lead to explosion even if not directly in contact with petrol.
Use fresh (within 30 days from purchase), unleaded petrol with a minimum of 87 octane rating. Do not mix oil
with petrol.
To add petrol, follow these steps:
(Fig. 8)
1
.
Make sure the pressure washer is on a level surface.
2
.
Unscrew fuel cap and set aside. NOTE: The fuel cap may be tight and hard to unscrew.
3
.
Slowly add unleaded petrol to the fuel tank. Be careful not to overfill. The capacity of the fuel tank is
1.2L. NOTE: Do not fill the fuel tank to the very top. Petrol will expand and spill over during use even
with the fuel cap in place.
4
.
Reinstall fuel cap and wipe clean any spilled petrol with a dry cloth.
IMPORTANT:
•
Never use an oil/petrol mixture.
•
Only use unleaded petrol.
•
Never use old petrol.
•
Avoid getting dirt or water into the fuel tank.
•
Petrol can age in the tankand make starting difficult.
Never store pressure washer for extended periods of
time with fuel in the tank.
Fig. 8
NOTE: After completing the above preparation, the pressure washer is ready to be started.
