12
Adding / Checking Engine Oil
• Place generator on a level surface.
• Remove screws and then remove the maintenance cover.
• Remove the crankcase dipstick.
• Insert a funnel into the crankcase dipstick hole and carefully add the specified amount of semi-synthetic SAE 10W-
30 engine oil until the oil reaches the outer edge of the oil fill hole (crankcase dipstick hole).
• Be sure to replace dipstick and securely tighten before attempting to start the engine.
• To check oil, set generator on a level surface, wipe dipstick clean, then reinsert dipstick without re-threading.
Recommended Oil:
SAE 10W-30
Oil Capacity:
0.35L (11.8oz)
ASSEMBLY
generator. Always check oil level each use.
CAUTION!
