15
5.6
Power to the appliance will be switched off but the generator engine will remain
running.
5.7
Switch off the electrical appliance and disconnect it from the generator.
5.8
Press and hold the reset button for 1 second.
5.9
The output indicator light should turn back to green and be ready for use again.
5.10
If the indicator light does not turn back to green, stop the generator and refer to the
maintenance section.
5.11
The oil warning system is designed to prevent engine damage caused by insufficient
oil in the crank case.
5.12
Before the oil level in the crankcase falls below a safe limit, the oil warning system
will automatically shut down the engine (the engine switch will remain in the ON
position).
5.13
If the oil warning system shuts down the engine, the oil warning indicator light (red)
will be on.
OIL WARNING INDICATOR LIGHT (RED)
5.14
The engine oil level will need replacing before the engine will start again.
5.14
The DC socket is only used for charging a 12V battery.
5.15
Turn the economy switch to the
OFF
position.
5.16
In order to avoid producing a spark, connect the charging cables to the battery
terminals first and then to the generator.
Reverse this procedure when disconnecting.
5.17
Connect the positive battery terminal to the positive charging cable.
DO NOT
reverse the charging cable as this could damage the generator or battery.
DC APPLICATIONS