Instruction/Safety Manual – P2 Quadcharger PRO
Thank you for purchasing P-Squared Group’s P2 Quadcharger PRO.
Please read this Instruction/Safety Manual fully before charging any
batteries.
This product is to be used with the Phantom 2 family of Intelligent Flight
Batteries (not included).
The P2 Quadcharger PRO will allow you to charge up to four batteries
simultaneously, in the same amount of time traditional chargers will charge
one. The P2 Quadcharger PRO provides safe mobile storage that can also
charge through your vehicle’s charging port.
Features:
P2 Quadcharger PRO (batteries not included) is a true rapid charger that
intelligently manages the charging current, voltage and temperature during
charging as well as being a convenient, lightweight storage and carrying
case.
In the box:
One P2 Quadcharger PRO
Instruction/Safety Manual
AC/DC power Supply
AC Power cord
DC Charging cable
Vehicle charging cable
Power pouch (optional)
Warning – Check “Vehicle Charging Chart” at www.p2-squaredgroup.com
for the number of batteries your vehicle should be able to safely charge
before proceeding with vehicle charging!
Charging
1.Securely plug your Phantom 2 batteries into the P2 Quadcharger PRO’s
charging slots.
2. Plug the DC charging cable into the P2 Quadcharger PRO.
3. Plug the DC charging cable into the AC/DC power supply.
4. Plug the AC power cable into the AC/DC power supply.
5. Plug the AC power cable into your AC power source (wall receptacle,
generator, etc.).
6. Turn the on/off power switch on the AC/DC power supply to the ON
position.
The “Power Output” LED lights will come on and your batteries will start
charging.
If three or four batteries are plugged into the P2 Quadcharger PRO for
charging, all the LED lights – including the “RED Max” light - will come on.
This is normal operation.
Batteries can be inserted or removed while charging.
Batteries will turn off when fully charged.
Note:
Charger will not charge any battery that the sensors indicate is too hot
or if conditions are too cold.
Note:
If a battery is already charged above 50% when charging begins you
may need to turn the battery ON to initiate charging.
Vehicle charging:
1.Insert your Phantom 2 batteries into the P2 Quadcharger PRO charging
slots.
2. Plug the vehicle charging cable into the P2 Quadcharger PRO.
3. Plug the vehicle charging cable into the vehicle’s charging port.
Note:
Depending on the level of charge in each battery the charging process
will start and stop as the amount of charge in the batteries equalizes.
Note:
Vehicle charging with your P2 Quadcharger PRO is designed as a
Supplemental Charging
process. Therefore in most vehicles the batteries will
only charge to between 50% – 70% of the battery’s charging capacity.
Note:
Vehicle should be running while charging with the P2 Quadcharger
PRO to avoid draining the vehicles battery.
