3
MAN 9037782 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
e-mail: [email protected]
It is normal for the motor to "buzz" for a few seconds
after switching off.
Never restart the saw while it is braking. Wait a minimum
of 1 minute before restarting.
Connection
Always connect the saw with a 5-wire cable. 3 phases, 1 zero and 1 earth.
The extension cable should be min. 1.5mm
2
, and if the length is over 20 metres, min. 2.5
mm
2
.
Assembly
Mount the bars between the two legs.
Mount the wheels on the axle and
secure them with the cotter pins.
Mount the safety guard. Secure it
with a 6x50 bolt through the hole in
the leg.
Mount the saw blade on the motor.
Make sure the saw blade's direction of rotation is
correct. The direction of rotation can be changed by
turning the phase transformer on the saw's plug.
