2
MAN 9065225 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: 70212626
DK-6600 Vejen
e-mail: [email protected]
Safety
WARNING! Read and understand all instructions before assembling and
using this device. Follow all directions to reduce the risk of personal
injury and/or damage to the equipment.
Save the manual for reference.
1.
The device was designed for a specific funktion. Do not modify or alter the device or
use it for an unintended purpose.
2.
Pay attention to the device, persons in the workarea and the workenvironment to
avoid personal injury or damage to the device.
3.
Do not operate the device when your are tired or under the influence of drugs, alcohol
or medications.
Unpacking
WARNING! Do not operate the device if any part is missing. Replace the
missing part before operation. Failure to do so can result in malfunction
and personal injury.
Remove the parts and accesories from the packaging and inspect for damage. Make
sure that all items in the parts list are included.
Assembly and installation
1.
Place the table top (7) upside down on a smooth surface.
2.
Attach the four legs (10) to table top by bolts (3), flat washers (5) and spring washers
(4), then
finger tighten.
3.
Attach the shelf (8) to the legs by bolts (1) and nuts (2), then
finger tighten.
4.
Mount castor wheels (6) to all four legs.
5.
Set the table upright, check its level, then tighten all the hardware with a wrench.
6.
Install the plastic fluid drain pan (9) on the left side of the table top.
