25
MAN 9064762 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: 70212626
DK-6600 Vejen
e-mail: [email protected]
Replacement of bucket
CAUTION: Exercise caution to avoid metal parts flying around which can lead
to personal injury. Use safety goggles or other suitable safety equipment!
CAUTION: When the connection pin is driven in or out, ensure you avoid
personal injury from flying metal parts. Use safety goggles, face visor or other
suitable safety equipment!
1.
Park the machine on a flat surface and lower the bucket's flat surface onto the ground
to ensure that the bucket cannot move when the pins are removed,
2.
Remove the bucket pins A and B to remove the bucket and arm. Clean the pin and hole
and lubricate these thoroughly.
3.
Adjust the arm and the new bucket.
4.
Insert the bucket pins A and B.
5.
Insert the locking ring and washer on pin A and pin B.
6.
Adjust the bucket’s connection distance at pin A.
7.
Lubricate pin A and B.
8.
Start the engine and allow it to operate at low speed. Slowly turn the bucket in two
directions to check that nothing interferes with the bucket’s movement. Do not use the
machine if there is something interfering with the movement and remedy the problem
immediately.
Connecting rod