12
MAN 9063771 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
e-mail: [email protected]
Maintenance and sharpening of blades
•
Check the blade and the fasteners for looseness, cracking, or bending.
•
Check the cutting edges and reform with a flat file.
•
You need not to adjust the gap between upper blade and lower blade as this product is
designed to have optimal gap when it is properly set up.
Always keep the file or sharpener at an
angle of 45° to the blade, and:
•
Always grind in the direction of the
cutting edge.
•
Note: files cut only in one direction; lift the file from the blade when returning to start a
new pass.
•
Remove all burr from the edge of the blade with a slip stone.
•
Remove as little material as possible.
•
Before refitting the sharpened blades, remove filings and then apply grease.
Do not try to sharpen a damaged blade - change it.