3
MAN 9062812 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: 70212626
DK-6600 Vejen
e-mail: [email protected]
Generel Instructions
Assembly of this unit is done by fitting the brackets of the beam into the slots of the
post frames.
If rubber mallet is used take care to protect the beam surface to avoid damage by
using a protective cloth or block of wood.
The stepped surface of the beam ledge is the top, and should face upwards. This is
the surface that the wire deck will rest on.
The beams should engage and fit firmly into the tapered slot of the post frame. A
visual inspection should be made to show that the bracket is properly engaged in the
slot.
Safety Instructions
This unit should be placed on a level surface. Failure to do so can result in poor
product perfomance or create a possible safety hazard.
This unit should be securely anchored to a wall or floor.
Do not use this unit for anything other than the manufacturer’s intended purpose.
Do not stand on any part of the unit, or use it at a ladder.
Use care when working with metal parts. Wear gloves for protection.
Evenly distribute the weight on each level an always keep the
heavier loads on the bottom.
