15
MAN 9062629 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Safe work zone:
Wood chipping:
NB –
the diameter of branches and pieces of wood may not exceed 100 mm.
WARNING –
Never put your hands in the chute when it is being filled. This is a
very DANGEROUS method and can cause severe injury to your hands.
Do not feed or step out in front of the feed chute area while the woodchipper is
running. This is a very DANGEROUS method that could cause personal injury or death.
In the event of a blockage
If anything gets stuck in the disks while chipping wood, stop the engine and remove
the stuck material. Then re-start the engine and resume wood chipping.
Seen from above
Work zone
Support leg
Engine
Work zone
Feed chute
