6
MAN 9043623 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Emergency stop
In emergency situations, ensure that
you immediately activate the emergency
stop switch, which is fitted on the side of
the engine.
Maintenance
•
Check the oil level every time before starting the engine and refill if necessary.
•
Change the engine oil after the first 5 hours of operation. Then once per year,
•
Clean or replace the air filter as required.
•
Make sure the V-belts are always tight.
•
Check the rotor bearings and wheel bearings regularly.
•
All of the technical checks and maintenance must be carried out with the engine
switched off and the sparkplug terminal removed.
•
Wipe off the machine with a damp cloth. If you use a high pressure cleaner, never
point the jet directly at the bearings.
•
The two lubricating nipples on the rotor require lubrication once a year or after
500 hours of operation.
•
Before putting the machine into storage, lubricate or oil the rotor, blades and
counterknife to protect against corrosion.
Technical data
Engine
420 cc
Fuel tank
6.5 l
Petrol
Octane 92, unleaded
Engine oil amount
1.1 l
Engine oil type
SAE 10W-30 or SAE 15W-40
Rotor drive
Double V-belt
Distance between the blade and
counterknive
0.5 mm
Feeding height
90 cm
Feeding wheel
40 x 30 cm
Ejection height spout
130 cm
Pneumatic rubber wheels
13X5.00-6
Weight
160 kg
Dimensions (length x width x height)
150 x 83 x 150 cm
