3
MAN 9032389 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Maintenance
Clean the spreader thoroughly after use and then lubricate with rust protection.
Store the spreader in a dry location.
The gearbox has been filled with grease at the factory and further filling is not
necessary.
Assembly
First, assemble the hopper.
Do not tighten the screws until the end of the procedure.
NB: When fitting the lock mechanism, ensure that the labels are next to each other.
Once the corners are fitted and are correctly in position, tighten all of the bolts.
Once the hopper is assembled and all of the screws are
tightened, place the hopper with the inspection labels
down.
Summary of Contents for 9032389
Page 2: ......
