9
MAN 9029312 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tlf: 70212626
DK-6600 Vejen
e-mail: [email protected]
MAINTENANCE
•
After each use clean material out of hopper.
•
Rinse/dry inside and outside of the spreader after each use.
•
Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE.
•
Periodically check all fasteners for tightness.
•
Annually clean and lightly lubricate parts.
•
Use a glossy enamel spray paint to touch up scratched or worn painted metal
surfaces.
•
Never exceed load capacity rating of 125lbs it will damage the spreader.
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s specifications.
Replacement parts that do not meet specifications may result in a safety hazard or poor
operations.
STORAGE
•
Never allow material to remain in the hopper for extended periods of time.
•
Before storing make sure the spreader is clean and dry for years of trouble-free
service.
•
Store indoors or protected area during severe weather and winter months.
WARNING
ALWAYS
maintain the proper tire pressure.
DO NOT
over or under inflate the tires as
serious injury may result.
ALWAYS
keep the tires at
25PSI.
