2
MAN 9057833 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
2.
Position the supplied self-adhesive cushion between the basket and the luggage
carrier to avoid scratches.
3.
Use the two attachment fittings, two M6 x 80 bolts, two nylon nuts and four washers to
secure the basket, as shown in the illustration. Ensure that the fitting on top of the
basket is positioned above the square tube on the basket’s frame and that the bolts
are fitted on both sides of the tube.
4.
Fit the rest of the fittings. Distribute the mounting fittings evenly across the basket’s
surface. Check that the basket is level and ensure that is secured safely and correctly.
Tighten the bolts.
WARNING - Do not exceed the ATV’s load capacity.
Ref# Total
number
Description
1
1
Basket
2
8
Mounting fitting
3
8
M6 x 80 bolt
4
16
Ø6 SAE washer
5
8
M6 nylon nuts
Fitting instructions for front luggage carrier basket
Luggage carrier rear edge
