11
MAN 9059794 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Guide pin/spring
Place one end of the control pin with the spring on the left leg using M8 x 55 bolts,
washers and nuts, as shown in Fig. D.
Fitting the tilting table to the
frame
Lay the tilting table on the floor with
the legs inside the base frame and
place one end of the cross brace
outside, as shown in Fig. E. Join them
using M8 x 40 bolts, washers and
locking nuts on both sides.
Secure the other side of the cross
brace from the interior side of the
base frame using M8 x 70 bolts,
washers and locking nuts on both
sides.
Summary of Contents for 65651
Page 2: ......