P.L.LIGHT SYSTEMS NXT-LP 1000W, Instruction Manual

Page: 14 / 16

10.3. Maintenance Cleaning the Reflectors
Regular cleaning of reflectors is essential for optimal lighting performance. Your
reflectors need to be cleaned at a minimum every two years, but every year is
highly recommended.
• Switch off main power source.
• Remove the reflector from fixture(see paragraph 10.2.).
• A reflector can be cleaned with a 1:100 vinegar to water solution. Dip the
reflector in this solution for a few seconds.
• If necessary, rub lightly with a fine fingernail brush to loosen the dirt. Once
the dirt is loosened, rinse the reflector in distilled water. Rinse the reflector
once more in distilled water.
• Hang to air dry. Once dry, if there are still heavy deposits or anything that
cannot be removed, it is time for the reflector to be replaced.
• Re-install reflector (see paragraph 10.2.)
• Switch on main power source.
Note:
P.L. Light Systems recommends for your safety, when cleaning
reflectors always maintain the correct ratio and never add other chemicals to
the solution. Wearing hand and eye protection is advised.