P.I.T. PWP120-C1, Operation Manual

Page: 5 / 20

Burnishing Polisher
4
Special Safety Instructions
Hold power tool by insulated gripping surfac-
es, Cutting a “live” wire may make exposed
metal parts of the tool “live” and could give
the operator’ an electric shock.
Flying sparks are created when sanding met-
al.Ensure that no persons are in danger. Due
to the risk of fire, all combustible materials
must be removed from the work area (area
aff ected by fl ying sparks).
During machining, of metals in particular, con-
ductive dust can form deposits inside the ma-
chine. This can lead 1 the transfer of electrical
eneray onto the machin housing. This can
mean a temporary danger of electric shocks.
This is why it is necessary when the machine
is running to blow compressed air through the
rear ventilation slots of the machine reqularly,
frequently and thoroughly. Here, the machine
must be held fi rmly.
We recommend using a stationary extractor
ystem and connecting a residual current cir-
cuitbreaker (Fl) upstream. When the machine
is shut down via the Fl circuit-breaker, it must
be checked and cleaned. See chapter 8
Cleaning for more information on cleaning the
motor.
Dust from material such as paint containing
lead,some wood species, minerals and metal
may be harmful. Contact with or inhalation of
the dust may cause allergic reactions and/
or respiratory diseases to the operator or by-
standers.
Certain kinds of dust are classifi ed as carcino-
genic such as oak and beech dust especially
in conjunction with additives for wood condi-
tioninQ (chromate,wood preservative). Mate-
rial containing asbestos must only be treated
by specialists.
► Where the use of a dust extraction device
is possible it shall be used.
► The work place must be well ventilated.
► The use of a dust mask of filter class P2
isrecommended.
Observe the regulations in force in your coun-
try for the processed materials.
Materials that generate dusts or vapours that
may be harmful to health must not be pro-
cessed.
Wear ear protectors. Exposure to noise can
cause hearing loss.
Wear protective gloves.
Always wear protective goggles.
Secure the workpiece against slipping, e.g.
with the help of clamping devices.
Always guide the machine with both hands
on the handles provided. Loss of control can
cause personal injury.
Never place your hand near rotating parts of
the device or near the rotating grinding wheel.
Remove sanding dust and similar material
only when the machine is not in operation.
Pull the plug out of the plug socket before any
adjustments, conversions or servicing are
pertormed.
Product Description and Specifi-
cations
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The brush grinder is designed for surface
cleaning, sanding, polishing, satin finishing
and brushing of wood and metal surfaces
without water supply.
Product Features
The numbering of the product features refers
to the diagram of the power tool on the graph-
ics page.
(1) Spindle
(2) Speed control thumbwheel
(3) Self-locking button
(4) On/off switch
(5) Protection/dust cover
(6) Auxiliary handle
(7) Burnishing head
(8) Flange
(9) Burnishing head fi xing screw
(10) Side cover
(11) Side cover fi xing screws
(12) Vacuum cleaner adapter
(13) Fixing screw of vacuum cleaner adapter
(14) Nut for protection/dust cover
(15) Fixing screws for protection/dust cover
(16) Spindle lock button
(17) Dust outlet cover
(18) Phillips screwdriver hex key
(19) Hex key
(20) Shaft key
Technical Data
Model PWP120-C1
3BUFE7PMUBHF
220 V~/50 Hz
3BUFE1PXFS
1500 W
3BUFEOPMPBETQFFE
600-3500 r/min
.JYJOHEJBNFUFS
φ120 mm