P.I.T. PH20-3.0A, User Manual

Page: 3 / 18

Product Description and Specifications
Read all safety warnings and all instructions. Failure to follow the warn-
ings and instructions may result in electric shock, fire and/or serious injury.
Save these instructions.
Use the battery charger only when you fully understand and can perform all
functions without limitation, or have received appropriate instructions.
Safety Notes
This charger is not intended for use by children and persons with
physical sensory or mental limitations or a lack of experience or
knowledge. This charger can be used by children aged 8 and above
and by persons who have physical, sensory or mental limitations or a
lack of experience or knowledge if a person responsible for their
safety supervises them or has instructed them in the safe operation of
the charger and they understand the associated dangers. Otherwise,
there is a danger of operating errors and injuries.
-
Supervise children. This will ensure that children do not play with the
charger.
-
Charge only lithium-ion batteries based on P.I.T. 20V battery system.
Do not charge on rechargeable batteries.
Otherwise there is danger of
fire and explosion.
Keep the battery charger away from rain or moisture. Penetration of water
in the battery charger increases the risk of an electric shock.
-
Keep the battery charger clean . Contamination can lead to danger of an
electric shock.
-
Before each use, check the battery charger, cable and plug. If damage
is detected, do not use the battery charger. Never open the battery
charger yourself.Have repairs performed only by a qualified techni-
cian and only using original spare parts . Damaged battery chargers,
cables and plugs increase the risk of an electric shock.
-
Do not operate the battery charger on easily inflammable surfaces (e.
g., paper, textiles, etc.) or surroundings. The heating of the battery
charger during the charging process can pose a fire hazard.
-
In case of damage and improper use of the battery, vapours may be
emitted. Ventilate the area and seek medical help in case of
complaints. The vapours can irritatethe respiratory system.
-
Do not cover the ventilation slots of the battery charger. Otherwise, the
battery charger can overheat and no longer operate properly.
Product Features
The numbering of the product features refers to the illustration of the battery
charger on the graphics page.
1 Red battery charge indicator 4 body
2 Green battery charge indicator 5 power cable
3 Charging compartment
Technical Data
Battery charging voltage DC 12V/16V/20V
Charging current 3.0A
Max power 75W
Allowable charging temperature range 0-45
O
C
Operation
Starting Operation
Observe the mains voltage! The voltage of the power supply must corre-
spond with the data given on the nameplate of the battery charger.
Charging Procedure
The charging procedure starts as soon as the mains plug of the battery
charger is plugged into the socket outlet and the battery is inserted into the
charging compartment.Due to the intelligent charging method, the charging
condition of the battery is automatically detected and the battery is charged
with the optimum charging current, depending on battery temperature and
voltage.
Meaning of the Indication Elements
Charging
：
red End charge:green
Working Advice
With continuous or several repetitive charging cycles without interruption,
the charger can warm up. This is not meaningful and does not indicate a
technical defect of the battery charger.
A significantly reduced working period after charging indicates that the
battery is used and must be replaced.
Maintenance and Service
Maintenance and Cleaning
If the replacement of the supply cord is necessary, this has to be done by
P.I.T. or an authorized P.I.T. service agent in order to avoid a safety hazard.
TERMS OF WARRANTY SERVICE
1. This Warranty Certificate is the only document that confirms your right to
free warranty service. Without presenting this certificate, no claims are
accepted. In case of loss or damage, the warranty certificate is not
restored.
2. The warranty period for the electric machine is 12 months from the date
of sale, during the warranty period the service department eliminates manu-
facturing defects and replaces parts that have failed due to the fault of the
manufacturer free of charge. In the warranty repair, an equivalent operable
product is not provided. Replaceable parts become property of service
providers.
P.I.T is not liable for any damage that may be caused by operation of the
electric machine.
3. Only clean tool accompanied with the following duly executed docu-
ments: this Warranty Certificate, Warranty Card, with all fields filled out,
bearing the stamp of the trade organization and the signature of the buyer,
shall be accepted for warranty repair.
4. Warranty repair is not performed in the following cases:
- in the absence of a Warranty Certificate and a Warranty Card or their
incorrect execution;
- with failure of both a rotor and a stator of the electric engine, charring or
melting of primary winding of the welding machine transformer, charging or
starting-charging device, with internal parts melting, burn down of electronic
circuit boards;
- if a Warranty Certificate or a Warranty Card does not correspond to this
electric machine or to the form established by the supplier;
- upon expiration of the warranty period;
- at attempts of opening or repair of the electric machine outside the
warranty workshop; making constructive changes and lubrication of the tool
during the warranty period, as evidenced, for example, by the creases on
the spline parts of the fasteners of non-rotational parts.
- when using electric tools for production or other purposes connected with
making a profit, as well as in case of malfunctions related to instability of
the power network parameters exceeding the norms established by GOST;
- in the events of improper operation (use the electric machine for other
than intended purposes, attachments to the electric machine of attach-
ments, accessories, etc. not provided by the manufacturer);
- with mechanical damage to the case, power cord and in case of damages
caused by aggressive agents and high and low temperatures, ingress of
foreign objects in the ventilation grids of the electric machine, as well as in
case of damage resulting from improper storage (corrosion of metal parts);
- natural wear and tear on the parts of the electric machine, as a result of
long-term operation (determined on the basis of the signs of full or partial
depletion of the specified mean life, great contamination, presence of rust
outside and inside the electric machine, waste lubricant in the gearbox);
- use of the tool the purposes for other than specified in the operating
instructions.
- mechanical damages to the tool;
- in the event of damages due to non-observance of the operating condi-
tions specified in the instruction (see chapter “Safety Precautions” of the
Manual).
- damage to the product due to non-observance of the rules of storage and
transportation.
Preventive maintenance of electric machines (cleaning, washing, lubrica-
tion, replacement of anthers, piston and sealing rings) during the warranty
period is a paid service.
The service life of the product is determined by the manufacturer and is 2
years from the date of manufacture,
The owner is notified of any possible violations of the above terms of
warranty service upon completion of diagnostics in the service center.
The owner of the tool entrusts the diagnostic procedure to be conducted in
the service center in his absence.
Do not operate the electric machine when there are signs of excessive
heat, sparking, or noise in the gearbox. To determine the cause of the
malfunction, the buyer should contact the warranty service center.
Malfunctions caused by late replacement of carbon brushes of the engine
are eliminated at the expense of the buyer.
5. The warranty does not cover:
- replacement of parts (accessories and furniture), for example: accumula-
tors, disks, knives, drills, bores, cartridges, chains, sprockets, collet clamps,
buses, tensioning elements and fasteners, trim tabs, pads of grinders and
tape machines, etc.
- quick-wear parts, for example: carbon brushes, drive belts, glands, protec-
tive covers, guide rollers, guides/rails, rubber seals, bearings, timing belts
and wheels, shafts, brake band, ratchet wheels and starter cables, piston
rings, etc. Replacing them during the warranty period is a paid service.
- power cords, in case of insulation damage, power cords are subject to
mandatory replacement without the consent of the owner (paid service),
- casing of machine.
BATTERY CHARGER
2