P.I.T. PAC24-C, User Manual

Page: 5 / 26

1. Electric Motor
2. Pressure Relay
3. Exhaust Valve
5. Manometer
6. Back Valve
7. Condensate Drain Valve
8. Transportation Wheels
9. Exhaust Pipe
10. Air Tank (Receiver)
11. Protective Cover
5
4. Crane Regulator
Air compressor
The main component of the compressor. It
initiates the process of air compression. Made
of aluminum alloy with cooling fins. It is used to prevent chang-
es in the airflow in the
system. It is installed in the
pipeline.
It is used to control the air
compressor motor in auto-
matic mode within the speci-
fied pressure
ranges and maintain the
required working pressure in
the compressor receiver.
It is used to remove con-
densate from the receiver.
It is used to discharge air
into the atmosphere. Ii is
installed in the discharge
pipe of the compressor. In
the closed position, the
valve is held by a spring.
It is used for fast and convenient
transportation of the compressor.
It is used to regulate the air
outflow.
It connects the elec-
tric motor, back-flow
valve and receiver. It
is used for the air
outflow.
It displays the pressure
inside the receiver. It is
installed on the pressure
relay.
It is used to collect compressed air. The com-
pressor unit accumulates compressed air in
the receiver to compensate the airflow pres-
sure in the line, and provides uninterrupted air
supply, and reduction of the number of com-
pressor on/off cycles.
It is used to protect important parts of the
compressor from possible damage.