P-Com AirPro Gold, Hardware Installation Manual

Page: 40 / 54

Hardware Installation Guide 4-1
4
. . . .
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
R
ACK
M
OUNTING
Figure 4-1 Rack Mounted Radios
An AirPro Gold
®
unit can be mounted in a standard 19 inch or 23 inch
equipment rack (see Figure 4-1), using brackets and hardware provided
in the shipping carton.
The rack mounting brackets can be installed on the unit chassis in one of
three positions: front, center, or rear, depending on how you want the
chassis positioned in the rack.
When installing the unit in a rack with other equipment, you must provide 1.75
inches of space above, below, and on each side of the unit to allow proper
ventilation.
For a 19 inch rack, short bracket flanges face the front of the unit. See
Figure 4-2 on page 4-2. For a 23 inch rack, longer bracket flanges face
the front of the unit. See Figure 4-3 on page 4-3.
Front Flange
Screws
(Supplied by
Customer)
APG2_003
Ethernet
RS232
RSQ/RSSI
Alarm
Link
Frame TX
Ethernet Link
Ethernet Activity
Power
Ethernet
RS232 RSQ/RSSI
Alarm
Link
Frame TX
Ethernet Link
Ethernet Activity
Power