background image

11

PLEASE READ BEFORE SETTING UP YOUR TENT/SHELTER

CAMP SAFE - SAFETY HABITS

The fabric may burn if left in continuous contact with a flame from any source. Also, the 

application of any foreign substance to the tent fabric may render the flame resistant 

properties ineffective.

To prevent injury caused by gas poisoning or suffocation -

•Do not use fuel burning, oxygen consuming devices inside the tent. This includes candles, 

gas lanterns, kerosene lamps, stoves, cooking and heating appliances 

•Do not use gas appliances of any kind inside the tent/shelter

   

 

 

 

 

Important Safety And Care Information

• Do not leave your 

tent/shelter erected  

in strong winds - 

collapse the tent 

onto the ground and 

seek  refuge in your 

vehicle

• Do not pitch the tent/shelter near a 

camp fire or any other flame source

• Do not use candles, matches or any 

other flame source in or near the 

tent (this includes stoves, cooking 

equipment, lighting and heating 

appliances)

• Only use recommended water 

repellent compounds on the tent/

shelter fly

• Do not spray tent fabrics with 

insecticides

To prevent injury caused by 

electricity - 

     

   

•  Always exercise care when using 

electricity and electric lighting in and 

near tents/shelters. Only use 12 volt 

lighting.

•  Do not pitch your 

  tent/shelter near 

  cliffs in case of 

  collapse or rock fall

5
4
3
2
1

• Do not pitch your  

tent/shelter on an 

  area that could get  

flooded

•  Do not pitch your

  tent/shelter under  

trees with dead 

branches or under  

trees known to drop 

branches

To prevent injury caused by fire -

To prevent injury caused by your camping 

environment - 

Summary of Contents for PEAK TWIN DOME

















Reviews: