MODEL
#
MP-BDSPU
PARTS LIST
4 x Pegs
2 x Guy Ropes
1 x Tent Bag
NB: Always mention the Model Number in
all correspondence regarding your tent.
PopUp Beach
Dome
IMPORTANT: This beach dome is to be pitched once before use to ensure that all
parts are present and to become familiar with the assembly and pack up of the beach
dome.
Step 1 – Choosing the beach dome site
Select a sheltered site protected from the wind.
Clear a level area of all sharp objects, twigs etc.
Step 2 – Standing the beach dome up
Remove the beach dome from the carry bag and release elastic strap, gently allow the beach
dome to unfold and open fully.
Step 3 – Peg down the beach dome
Position the beach dome facing the desired direction. Peg the four corners of the beach
dome to the ground by driving pegs through the webbing loops at the base corners of the
beach dome. Firm but not tight. Fill the sand bags provided and sand pockets under the front
and rear floor of the beach dome for added stability.
Step 4 – Install guy ropes
Attach the guy ropes to the beach dome. Make a loop (about 30 cm to 50 cm long) with the
slider on the end of the rope and peg out as far as possible from the beach dome. Ensure all
peg down points are utilised and all guy ropes are attached firmly and remain firm.
PLEASE NOTE: IN SEVERE CONDITIONS THE BEACH DOME SHOULD BE
DISMANTLED.
Please note, weights measurements are approximate only. Due to our Policy of continual product
development, specifications and features may vary time to time.
ASSEMBLY INSTRUCTIONS
