5
Step 1 Choose the site
Select a sheltered camp site protected from the
wind that will not allow water to pond under
the tent floor. Clear a level area of all stones,
twigs, etc.
Step 2 Lay out the tent
Unpack the contents of your tent. Lay out the
inner tent facing the desired direction. Ensure
that you have the doors facing the direction
you desire.
Step 3 Peg down the tent
There are several peg points. The peg point
locations are indicated in Figure 1. Anchor the
Main tent to the ground by inserting the pegs
through the rings around the base of the tent
at an angle of 45 degrees as indicated in Figure
2, firm but not tight. As you work from one peg
point to the other around the tent base pull the
floor firmly, but not tight.
Step 4 Assemble the poles
Assemble all poles making sure each pole
junction is securely connected. Place the
assembled poles side by side for easy
identification, see Figure 3.
Assembly Instructions
Figure 1
Figure 2
192cm
105cm
25cm
155 degree
5
4c
m
9.5m
m
16mm
x2
x2
435cm
12.5m
m
11mm
280cm
x2
x2
19mm
196cm
x4
19mm
181cm
x4
16mm
185cm
x4
HELPFUL HINT
1. After unpacking the tent or shelter, use the
check list on page 3 to identify all parts and
make sure all parts are present.
2. It is important to condition your tent or
shelter before use. See page 13 for instructions
Main Tent
