Peg Point
4
ASSEMBLY INSTRUCTIONS
PLEASE NOTE
In severe conditions the tent should be
dismantled
STEP 1: CHOOSING THE SITE
Select a sheltered camp site protected from
the wind that will not allow water to pond
under the tent floor. Clear a level area of all
stones, twigs, etc.
STEP 2: STANDING THE DOME TENT UP
Remove the tent from the carry bag and
carefully release elastic strap, gently allow the
tent to unfold and open fully.
STEP 3: PEG DOWN THE DOME TENT
Position the tent facing the desired direction.
Peg out the corners of the tent. For peg point
locations, see
Figure 1. Anchor the tent to the
ground by inserting the pegs through the
loops around the base of the tent at an angle
of 45 degrees, see
Figure 2. Firm but not
tight. As you work from one peg point to the
other around the tent base pull the floor
firmly, but not tight.
Do not force the sprung
frame, follow
instructions carefully
45
o
Figure 2
Figure 1
