EN
8
HOW TO OPERATE YOUR ECLIPSE 4000 cont..
9. Confirm that the generator is producing ozone. When the unit
is running, the fan can be heard and the sound of electric
discharge (sparks) can be heard. You can safely wait a short
while to detect the smell of ozone – but do not inhale directly
from the generator exit.
10. Leave the room.
11. After the desired treatment time, ozone will cease and the
unit will be in standby mode,
12. Allow the room to vent for a minimum of 30 to 45 minutes to
allow the residue ozone to degrade.
13. Then switch the unit off and continue to ventilate the
treatment zone. This should be extended to 1 hours if the
room cannot be effectively ventilated.
Program
Ozone
Generation
Time
Usage
Scenario
1
15 minutes
Light odours small
room
2
30 minutes
Light odours
medium size room
3
45 minutes
Stronger odours
and/or large room
4
60 minutes
Stronger odours
and/or large room
Notes:
• The generator may not start making ozone immediately after
switching it on when the temperature is very low, or the
humidity is very high. Ozone generation will begin once the
ozone plate warms up after a few seconds.
• The treatment time should be extended when the
temperature exceeds 30°C, or when the humidity is over 75%.
Program / Timer Modes
Please call us if
you need advice
on the program
selection for a
different room
size or odour
issue.
