3. LOADING NAILS
2. LOADING STAPLES
1 Hold the tool upside down.
1 Hold the tool upside down.
This staple nailer only accepts T50 18 gauge 8-16mm staples. Other
types of staples, including paper staples, will jam the unit.
This staple nailer only accepts 15mm 18 gauge C1 Brad nails. Other
types of nails will jam the unit.
3 Insert a row of staples
into the opening behind
the nose piece.
2 Squeeze the magazine latches on either side of the tool and pull the
magazine out of the tool.
2 Squeeze the magazine latches on either side of the tool and pull the
magazine out of the tool.
4 Push the loaded magazine back into the unit until it clips into place.
4 Push the loaded magazine back into the unit until it clips into place.
Note:
Rows of more than 90 staples do not fit in the staple nail gun.
Note:
Rows of more than 90 nails do not fit in the staple nail gun.
3 Insert a row of nails into the opening behind the nose piece. Be sure
to align them to the side marked with a nail marker so that the nail
head is against the internal groove.
WARNING!
ENSURE THE TOOL IS SWITCHED OFF AND
THE BATTERY IS REMOVED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
