3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
After removing the silent shredder from the
carton, check that the shredder has not
been damaged. Unpack the contents.
Fitting the wheels and stand
1. Carefully place the shredder housing
upside down on a flat surface.
2. Place each leg over the 2 threads
on the base of the shredder
housing. For maximum stability
ensure that the legs are facing
outwards.
3. Place a flat washer followed by the
nut over each of the 4 threads. Lightly
tighten using the hex wrench supplied.
4. Fit the wheel axle to the base of the
legs ensuring that it is positioned
towards the rear of
the shredder.
1. On/off switch
2. Transport handle
3. Reset button/overload protector
4. Direction control switch
5. Hopper
6. Cutting adjustment Knob
7. Discharge chute
8. Stand
9. Wheels
10. Collection bag
11. Hex key
12. Hex wrench
SILENT SHREDDER
ACCESSORIES
KNOW YOUR PRODUCT
1. WHEELS & STAND
ASSEMBLY
2
4
1
3
5
10
11
12
WARNING!
YOU MAY REQUIRE ASSISTANCE
LIFTING THE SHREDDER OUT OF THE CARTON.
6
7
8
9
WARNING!:
ENSURE THE TOOL IS TURNED OFF
AND DISCONNECT FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
