2. FITTING & REMOVING ACCESSORIES
3. ON/OFF SWITCH
OPERATION
On/Off trigger
Lock-On button
2 To stop the drill, release the
on/off trigger.
1 To start the drill, squeeze the
on/off trigger.
2 To unlock the drill, squeeze the
on/off trigger and then release.
2 Insert the drill bit, making sure
it is centred in the jaws.
4 To ensure the bit is securely
fastened, insert the chuck
key into 1 of the 3 holes on
the chuck. Turn chuck key
clockwise.
Repeat with the remaining 2
holes on the chuck.
1 To lock the drill on,
squeeze the on/off
trigger then depress
the lock-on button.
1 Open the chuck jaws
slightly larger than
the bit you wish to
insert.
3 Hand tighten the
chuck jaws.
5 To remove the
accessory, loosen
the chuck with the
chuck key and
remove the drill bit.
The tool has a variable speed trigger, the further you depress the on/off
trigger the higher the speed of the drill.
CAUtION!
tO REDUCE tHE RISk Of ELECtRICAL
SHOCk, tHE USE Of A RESIDUAL CURRENt DEvICE
(RAtED 30mA OR LESS) IS RECOMMENDED.
