2. SHARPENING ATTACHMENTS
3. ADJUSTING ATTACHEMENTS
2 Fit the chainsaw sharpening
attachment by rotating it
clockwise.
2 Place the wrench across
the top of the chainsaw
sharpening attachment,
aligning the sharpening wheel
with the matching sized guide
on the wrench.
4 Tighten the adjustable height
screw to secure the correct
position.
1 Remove the shaft
collar by rotating anti-
clockwise.
1 Using the wrench,
loosen the adjustable
height screw on the
chainsaw sharpening
attachment.
3 Adjust the height of
the attachment so that
the sharpening wheel
rests against the guide
on the wrench.
Before using the chainsaw sharpening attachment, the adjustable
height must be repositioned to correctly contact the sharpening
edge.
1 Select the diamond
sharpening wheel
that is slightly smaller
than the gap in the
chainsaw blade.
Before fitting one of the sharpening attachments, you must attach
the desired accessory and secure by tightening the collet nut.
2 Fit the blade
sharpening attachment
by rotating it
clockwise.
1 Remove the shaft collar by rotating anti-clockwise.
Fitting the Chainsaw Sharpening Attachment
Adjusting the Chainsaw Sharpening Attachment
Selecting the Correct Sharpening Wheel
Fitting the Blade Sharpening Attachment
