INTRODUCTION
3
Congratulations on purchasing an Ozito Reciprocating
Saw Kit. We aim to provide quality tools at an
affordable price.
The Ozito Reciprocating Saw RSR-850 is an extremely
versatile tool designed to cut many different types of
material in many varying situations. It is intended for
DIY use only.
Warning!
When using mains-powered equipment, basic safety
precautions, including the following, should always be followed to reduce
risk of fire, electric shock, personal injury and material damage.
Read and understand the manual prior to operating this tool.
Save these instructions and other documents supplied with this tool for future reference.
The electric motor has been designed for 230V and 240V only. Always check that
the power supply corresponds to the voltage on the rating plate.
Note:
The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.
This tool is double insulated in accordance with AS/NZS 60745-1,60745-2-11;
therefore no earth wire is required.
Check if double insulated or not, also check to which AS/NZS standard it is in
accordance with.
If the supply cord is damaged, it must be replaced by a qualified electrician or a
power tool repairer in order to avoid a hazard.
Note:
Double insulation does not take the place of normal safety precautions when
operating this tool. The insulation system is for added protection against injury
resulting from a possible electrical insulation failure within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of
an extension lead not suitable for the power input of the tool or which is damaged
or defective may result in a risk of fire and electric shock.
ELECTRICAL SAFETY
!!
!!
