4. ON/OFF SWITCH
5. SANDING
2. To turn the sander off, press the on/off button again.
OPERATION
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
2. To turn the sander on, press the on/off switch.
QSS-1000U
1. Connect the tool to the mains power supply.
CAUTION:
GUIDE THE CORD DURING SANDING TO
PREVENT IT BEING CAUGHT ON THE WORKPIECE,
OR OTHER OBJECTS.
1. Secure the material to be sanded.
2. Firmly grasp the sander. Turn it on and let the motor build up to
maximum speed. Gradually lower it onto the workpiece using a
forward movement.
3. For optimum results, use backward and forward strokes.
Note:
Keep the entire sanding pad in contact with the workpiece at
all times during sanding.
