2 Stage Brightness
1. Press the on/off trigger once
to switch the light on at 35%
brightness.
2. Press the trigger again for full
brightness.
3. Press the on/off trigger a third
time to switch the tool off.
2. CONTROLS
OPERATION
PXSLS-018
MAINTENANCE
Power tools that are no longer usable should not be disposed
of with household waste but in an environmentally friendly
way. Please recycle where facilities exist. Check with your local
council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in the
environment. Please recycle packaging where facilities exist.
Check with your local council authority for recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer
Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
WARNING!
BEFORE CLEANING OR CARRYING OUT
ANY MAINTENANCE PROCEDURE, ENSURE THAT
THE BATTERIES HAVE BEEN REMOVED.
WARNING!
KEEP THE LENS AT LEAST 1 METRE
FROM ALL SURFACES. THE LENS CAN PRODUCE
SUFFICIENT HEAT TO MELT FABRICS AND CAUSE
SERIOUS PERSONAL INJURY.
WARNING!
DO NOT POINT THE SPOTLIGHT DIRECTLY
AT A PERSON OR ANIMAL. DO NOT STARE DIRECTLY
AT THE SPOTLIGHT. BE CAREFUL OF POINTING IT AT
REFLECTIVE SURFACES.
Cleaning
• Keep the ventilation slots of the tool clean at all times to ensure efficient
operation.
• If the housing of the tool requires cleaning, do not use solvents. Use of a
cloth only is recommended.
• Never allow any liquid to get inside the tool, never immerse any part of
the tool into liquid.
Storage
When not in use, the tool should be stored in a dry, frost free location, keep
out of children’s reach.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by repair of the tool by an unauthorised person or by
mishandling.
